Skip to Content

Best and Cheap Tanning Bed Replacement Bulbs

Best and Cheap Tanning Bed Replacement Bulbs

If you are looking for a replacement bulb for your tanning bed that is both affordable and high quality, then this article might be perfect for you. In the following paragraphs, we will give you a list of our favorite bulbs as well as their prices.

We also provide some information on what to look out for when on the lookout for the best and cheap tanning bed replacement bulbs so that you can make an informed decision about which one to buy.

Affordable Tanning Bed Replacement Bulbs

Fluorescent bulbs are frequently used as tanning bed lights. They’re good for tanning since they emit specific amounts of UV light, which promotes tanning. The most frequent wattage is 100, although a 140-watt light is used.

T12 is the most common type of bulb in full-size tanning lamps. T5 bulbs, which are only available in 2-foot lengths, may be employed for certain face tanning in a few beds.

1. Wolff Diamond Suntanning

We earn a commission if you make a purchase, at no additional cost to you.
10/20/2022 12:16 am GMT

Diamond Sun tanning bed bulbs (F71 100w) before being packaged and sold, each bulb is subjected to numerous quality control tests. There is a guarantee of quality. Tans with longer-lasting and less-costly phosphors. They are also not as expensive to operate as other incandescent lights may be. The lamps’ 1000-hour service life is provided by the 80 and 100 watts, which have a 1000-hour lifespan.

More information:

  • A free product guide will also be sent to you for proper installation to protect damages of your tanning bed
  • Before leaving the factory, a series of inspections are performed to guarantee quality.
  • Tans that last a long time and are inexpensive to maintain.
  • The 1000 hour service life of the 80 watts and 100-watt lamps has been confirmed.

2. 16 Pack of Wolff Velocity

We earn a commission if you make a purchase, at no additional cost to you.
10/20/2022 12:16 am GMT

The Velocity Plus F71 100w tanning bed bulbs are approximately 10% stronger than the Velocity. The perfect solution for those who want a deeper, richer tan. It may be used as an upgrade to existing lamps. Without sacrificing UVB intensity, significantly comes with more UVB that won’t be compromising UVA Velocity is well-known for.

More information:

  • The Velocity is approximately 10% stronger than the Accelerator.
  • 100-watt equivalent light bulbs are rated for a 1000-hour life span.
  • Without sacrificing robust UVA Velocity, significantly more UVB is recognized.

3. Brilliance Bronzer

We earn a commission if you make a purchase, at no additional cost to you.
10/20/2022 12:16 am GMT

The Super Bright LED is a 5.0-watt bronzing lamp with a 120-watt output that is the best of its kind in other 100-watt applications. It’s also an excellent replacement for tanning beds requiring a 120-watt bulb and has a similar light spectrum as most high-end tanning lamps on the market.

It uses superior glass tubes and the best quality phosphor combination. Tanners appreciate this lamp because it is less expensive than other well-known options, yet it delivers tanners deep bronzing results consistently.

4. 24 Nib Wolff Velocity Plus

We earn a commission if you make a purchase, at no additional cost to you.
10/20/2022 12:17 am GMT

Velocity Extreme tanning lamp is superior to its siblings from the Wolff System in terms of additional features. It features an F71 100 wattage Bi-Pin design that’s simple to install and use with its tiny product guide. It’s a bundle with 24 never-used lamps that have a lifespan of 1000 hours. A stronger construction than Velocity Plus tanning bed lamps is included in this model.

  • F71 NIB Wolff Velocity Plus, 100watt bi-pin tanning bed bulbs
  • All of our products come with a free product guide.
  • Velocity is 10% more effective than traditional.
  • It’s also great for individuals with sensitive skin or those who don’t tan easily.

Why Do You Need to Replace a Tanning Bed Bulb?

When you buy or use a tanning bed, it will come with instructions on how to take care of the equipment. One thing they always say is replace your bulb after X amount of hours.

Why Is It Important To Replace A Tanning Bed Bulb?

If you forget to change your bulbs or wait too long and attempt to cut corners and use the bed with a burnt-out bulb, you can be seriously injured.

  • The bulbs in a tanning bed give off UVA and UVB light that is used to help users tan faster than they would in natural sunlight.
  • When you lay down in one of these beds and close your eyes or look away from the bulbs, it may be tempting to use the bed a while longer while you relax.
  • Unfortunately, while you do that, if your bulb is burnt out, you are being bombarded by concentrated UVA and UVB light which can not only damage your eyes but also cause severe burns on your skin.

Burning from the rays emitted from a tanning bed sounds like a rare thing to happen, but thousands of cases are reported every year as exposure to too much UV light can cause Pterygium. This is a growth on your eye surface and can result in loss of vision if it gets severe enough.

What Does A Tanning Bed Bulb Look Like?

Tanning bed bulbs look like ordinary incandescent light bulbs, but they have a different kind of wire in them so they don’t cause a shock when you go to replace them. You can tell if a bulb is burnt out if your tanning bed won’t turn on or it emits a warning sign that the bulb needs to be changed.

You can buy tanning bed bulbs at most stores that sell lightbulbs, or you can order them online. They come in a variety of wattages so make sure to buy the right one for your bed or better yet ask from your manufacturer.

How do I know whether my bulb is UVA or UVB?

If you are not sure whether your bulb is emitting UVA or UVB light, check the label on it. If your tanning bed is older and does not have this label, then it has a standard type of incandescent bulb that emits both types of rays. These bulbs produce more heat than the UV bulbs and will give you a more golden tan in less time.

UVB is considered to be the better of the two rays when it comes to producing a darker tan, but UVA light is what makes us look younger by increasing the production of collagen in your skin.

How Often Should I Change My Bulb?

The best practice is to change your bulb every six to seven months even if it has not burnt out. If you want a darker tan and think that using the bed with a burnt-out bulb will speed up the process, keep in mind that this can increase your risk of melanoma, so it’s not worth taking the chance.

How To Replace A Tanning Bed Bulb

Replacing your bulb is an easy process. You can choose to do it yourself, but if you are not sure what to look for or how the process works, you should call a professional service company to come out and change it for you.

Some of the things that might need to be replaced with your tanning bed are:

  • the bulbs
  • a new timer, if needed
  • new ballasts, if needed. A ballast is that big box on the outside of your tanning bed that regulates the flow of electricity into it. As with any electrical appliance in your home, you should only let a professional handle working on these to avoid being shocked or electrocuted.

What If My Tanning Bed Doesn’t Have a Light?

Some beds do not have bulbs and use something called a tanning accelerator pad instead of light to give you the tan you want. This works by using UVB rays, just like a regular tanning bed that has bulbs would use. You do not need to change these as often and usually only need to replace them once a year.

How Can I Maintain My Tanning Bed?

If you use your bed regularly, it will wear out over time, so it may be necessary for you to perform some basic maintenance tasks such as:

  • Cleaning the bed to remove any dust, dirt, or grime from your skin that has gotten into it.
  • Replacing the bulbs every six to seven months to ensure that you get a deeper tan faster and reduce your risk of melanoma.
  • Check the timer periodically so that it still works properly after all of the use it gets.
  • Replacing any ballasts that may need it. If you live in an area that has frequent power outages, then this is especially important as your bed will lose all of the settings you had programmed into it.

If you follow these tips, your tanning bed should give you years of service without needing too much attention from you.

How Does a Tanning Bulb Work?

Do you know how a tanning bulb works? Tanning bulbs use UV light to provide the bronze glow we all desire. But there is so much more than meets the eye! A few of the most intriguing facts about tanning lamps include:

UV-A Rays – Two types of rays can be emitted from your favorite tanning bulb. The first is known as UV-A rays, which are the less dangerous of the two. These waves are more closely related to the light we receive from the sun during tanning seasons than any other type of lamp on the market today.

While this may sound like an ideal solution for avoiding skin cancer, be aware that long-term use of UV-A rays can promote premature aging as well as some forms of skin cancer.

UV-B Rays – The second type of wave released from a tanning bulb is known as UV-B radiation. While this carries many of the same benefits as UV-A radiation, it is also responsible for most forms of skin cancer and sunburn!

This is a major reason why many tanning enthusiasts wear sunglasses during spray tans, especially those with light-colored eyes. These lights can cause irreversible damage to the retina over time.

What is the Best Tanning Bulb?

With all of this in mind, you may be wondering what type of tanning bulb provides the most effective solution for your skin.

  • If you are looking to maintain a safe tan over an extended period, consider opting for one that emits both UV-A and UV-B waves.
  • This ensures that you receive all of the benefits associated with tanning, without suffering from the harmful effects. In addition, try to use a bulb that emits between six and eight waves per second to avoid having your skin absorb too much radiation at once!
  • In general, the more expensive bulbs are likely to provide a safer tan as well as even tanning. If you are looking to create a regimen that works for you, invest in both the bulb and the light stand needed to keep it running at its optimal level.

These investments can end up saving you money down the road by ensuring your skin looks its finest!

Best and Cheap Tanning Bed Replacement Bulbs

What Are Other Parts of a Tanning Bed?

There are a few other parts of your tanning bed that you may not have realized were important. If any of these pieces burn out or break, you could ruin the entire thing. This is why it’s so important to understand exactly what makes a machine tick before you start tinkering with it.

Fortunately, we’ve provided a breakdown below.

Mobile Unit or Stationary Unit?

The first thing you have to figure out is whether your unit is a stationary one or a mobile one. You don’t want to try and replace the legs on a moving one!

If it’s a basic model, chances are pretty high that it’s stationary, so let’s start with discussing the items that are different on a mobile one.

– Mobile Units

  • The first important part of the unit is the deck itself. It’s generally made up of two sections: the actual platform where you stand or kneel, and then an outer rim that has all of the controls located inside it.
  • This is composed of several pieces, the first being a sensor strip. This is generally located on the back section of the deck and if it doesn’t read your card, you won’t be able to use the bed.
  • Then there’s the control box which houses all of those important buttons that we have been talking about. The machine itself will direct cables from this unit down to the motor while also powering some of the other functions.
  • Next, there’s a leg assembly, but this isn’t your average chair or table leg. It has to be able to handle weights of up to 350 pounds while not tipping over or breaking under pressure.
  • Above that, you have two grips which are located on either side of the bed’s base. Think of these as the hands that hold the entire platform up and keep it level.

– Stationary Units

  • Mounted on the main base of stationary units are two legs, or rather four leg assemblies.
  • Also mounted onto the center of these units is a motor, which allows each section of this bed to move in unison with one another.
  • Without these vital parts working properly, your tanning bed will be virtually unusable due to the lack of responsiveness from the console.

If any of these parts are damaged or burnt out, you should immediately seek out replacement units before trying to work on this machine yourself. 

If there is something wrong with one of your units but you don’t feel qualified to deal with the problem on your own, you should always contact a professional.

The Tanning Bed Bulb Starter

While it may not seem all that important, the tanning bed bulb starter plays an integral role in making sure that your machine is safe to use.

  • If this component has gone bad, there’s a chance you could be burned while using this unit since the machine thinks there’s already a bulb inside of it. This safety feature isn’t just there to protect you, either. It’s also in place in case the bulb blows out while the machine is in use.
  • When this component fails, it can result in a lot of different problems for your unit. One thing that might happen is that instead of shutting itself off when you remove the key, it will refuse to turn on at all. This is because the starter has to trigger a certain mechanism for your machine to function properly.
  • There have been cases where the starter itself has burnt out just from being overworked. In these instances, you would be able to turn on your unit but nothing would happen when you hit the power button a second time.

A faulty starter can also cause issues with your bulbs. If it’s burnt out, the machine will again refuse to turn on until it’s replaced since there is no power coming from the console. There have even been instances when this starter has burned out and fried all of your bulb wires in one fell swoop.

Conclusion

When buying a replacement bulb for your tanning bed, make sure that you are getting the right one for your machine. There are a lot of different starters and bulbs on the market, so it’s important to know which ones work with your model.

If you’re not sure about what to get, contact the manufacturer or take your unit to a local tanning salon for advice. They will be able to assist you with the correct purchase. Failure to do so could result in a damaged machine or, worse yet, an injury.

Best and Cheap Tanning Bed Replacement Bulbs